Voltage : 220V
Flow rate : 50L/Min
Power:1000W
Lift : 10-15m
The AOCHENG OILP01 is an AC-powered oil transfer pump designed for transferring lubricating oils and other compatible fluids in industrial and workshop environments. With a listed flow rate of 50 L/min, a 1000W motor and 220V power supply, it provides a practical solution for routine oil transfer and equipment maintenance applications.
| Parameter | Specification |
|---|---|
| Model | OILP01 |
| Product Type | Electric Oil Transfer Pump |
| Fluid | Oil |
| Inlet | 1 inch |
| Outlet | 1 inch |
| Power Supply | 220V AC |
| Flow Rate | 50 L/min |
| Motor Power | 1000W |
| Listed Lift Distance | 10–15 m |
Efficient Oil Transfer
The listed 50 L/min flow rate supports routine transfer tasks in workshops and industrial facilities.
AC-Powered Operation
The 220V power configuration suits locations with a compatible AC power supply.
Practical System Integration
The 1-inch inlet and outlet provide connection options for compatible oil transfer installations.
Designed for Maintenance Environments
The pump can be used in oil handling and equipment servicing applications where its fluid compatibility and operating specifications are suitable.
Compare the required flow rate, oil viscosity, transfer distance, inlet conditions and available power supply with the pump specifications. The OILP01 is listed at 50 L/min with a 220V AC supply and 1000W motor, but actual performance depends on the installation and operating conditions.
The listed lift distance is a reference for assessing the required transfer height. Buyers should confirm whether the figure refers to suction lift, delivery lift or total lift with the manufacturer before designing the system, as these conditions affect pump selection and performance.
Compatibility depends on the oil’s viscosity, temperature and material properties. Confirm the permitted viscosity range and operating temperature with the manufacturer, particularly for high-viscosity lubricants.
Check the inlet and outlet sizes, connection standards, hose ratings, available power supply and tank arrangement. Ensure the inlet line is properly configured and the pump is operated according to its installation instructions.
The catalogue does not specify a duty cycle. If the pump will operate frequently or continuously, confirm the permitted operating duration, cooling requirements and maintenance interval before purchase.e appropriate motor and connection configuration.
This OIL pump is suitable for all those applications where it is necessary to apply a transfer system with high suction capacity in order to transfer fluids with medium-high viscosity.
The high density of the oil, compared to other types of liquids, requires a greater strength in the transfer phase. For this reason, the Viscomat Vane oil and diesel transfer system is characterized by the AC self-priming vane pump, capable of supporting and guaranteeing a constant flow rate and regularity in the flow dispensed with low viscosity, up to 500 cSt with a flow rate of up to 50 l/min. The continuous operation ensures high suction capacity with pressure up to 6 bar. The asynchronous AC motor, on the other hand, is self-ventilated, closed and available in different voltages and frequencies, both single-phase and three-phase, in order to adapt to any working condition.
