Voltage : 220V
Flow rate : 50L/Min
Power:750W
Lift : 10-15m
The AOCHENG OILP02 is an AC-powered oil transfer pump designed for handling lubricating oils and compatible fluids in industrial, workshop and maintenance applications. It is available in configurations with different connection sizes, flow rates and motor powers, allowing users to select a suitable option for their transfer requirements.
| Parameter | Configuration 1 | Configuration 2 |
|---|---|---|
| Model | OILP02 | OILP02 |
| Fluid | Lubricants / Oil | Lubricants / Oil |
| Inlet | 3/4 inch | 1 inch |
| Outlet | 3/4 inch | 1 inch |
| Power Supply | 220V AC | 220V AC |
| Flow Rate | 50 L/min | 75 L/min |
| Motor Power | 750W | 1100W |
| Listed Lift Distance | 10–15 m | 10–15 m |
Choice of Flow Rate
The 50 L/min and 75 L/min options help users match pump capacity to the required transfer volume.
Flexible Connection Options
Different inlet and outlet sizes support a range of compatible hose and piping arrangements.
AC-Powered Transfer
The 220V configuration is suitable for installations with a compatible electrical supply.
Practical for Workshop and Industrial Use
The pump series is designed for oil transfer and maintenance tasks where the selected configuration matches the fluid and system requirements.
Estimate the required transfer volume and the time available for each operation. The 75 L/min configuration may suit applications requiring higher throughput, while the 50 L/min option may be adequate for routine transfer tasks. Actual flow depends on oil viscosity, lift, hose dimensions and system resistance.
Connection size affects the compatibility of the pump with the existing hose or pipework and can influence system flow resistance. Select the connection option that matches the planned installation, and confirm thread standards before ordering.
Suitability depends on the oil’s viscosity and temperature, as well as the pump’s design limits. Confirm the allowable viscosity range with the manufacturer before using the pump with heavy lubricants.
The catalogue lists a lift distance of 10–15 m but does not clearly identify whether this is suction lift, delivery lift or total lift. Confirm the definition and test conditions before using this value for system design.
Provide the required flow rate, oil type and viscosity, transfer distance, inlet and outlet sizes, power supply and expected operating frequency. These details help identify the appropriate motor and connection configuration.val before purchase.
This OIL pump is suitable for all those applications where it is necessary to apply a transfer system with high suction capacity in order to transfer fluids with medium-high viscosity.
The high density of the oil, compared to other types of liquids, requires a greater strength in the transfer phase. For this reason, the Viscomat Vane oil and diesel transfer system is characterized by the AC self-priming vane pump, capable of supporting and guaranteeing a constant flow rate and regularity in the flow dispensed with low viscosity, up to 500 cSt with a flow rate of up to 50 l/min. The continuous operation ensures high suction capacity with pressure up to 6 bar. The asynchronous AC motor, on the other hand, is self-ventilated, closed and available in different voltages and frequencies, both single-phase and three-phase, in order to adapt to any working condition.
