Material: Aluninum
Flow rate : 20-60L/Min
Inlet/Outlet: 1''
Max Pressure: 0.3Mpa
The LLY Series Automatic Fuel Nozzle integrates a flow meter and an automatic shut-off function for convenient fuel dispensing and on-site measurement. Designed for fuel transfer applications, it combines flow measurement and dispensing control in one unit, operating within a working pressure range of 0.15–0.3 MPa.
Available in LLY-25, LLY-32, and LLY-38 models, this fuel nozzle series supports different flow requirements for diesel and kerosene dispensing applications.
The LLY Series automatic fuel nozzle with flow meter is suitable for:
| Specification | LLY-25 | LLY-32 | LLY-38 |
|---|---|---|---|
| Nominal Diameter | 25 mm | 32 mm | 38 mm |
| Minimum Flow Rate | 25 L/min | 32 L/min | 38 L/min |
| Rated Flow Rate | 35 L/min | 60 L/min | 80 L/min |
| Maximum Flow Rate | 60 L/min | 100 L/min | 120 L/min |
| Accuracy | ±1% | ±1% | ±1% |
| Working Pressure | ≤0.3 MPa | ≤0.3 MPa | ≤0.3 MPa |
| Meter Display Range | 1–9999 | 1–9999 | 1–9999 |
Product Series: LLY Series
Product Type: Automatic Fuel Nozzle with Flow Meter
Measured Fluids: Diesel and kerosene, subject to the specified operating conditions
The integrated design combines fuel delivery with volume measurement, reducing the need for separate metering equipment at the dispensing point.
The LLY-25, LLY-32, and LLY-38 models provide different rated and maximum flow rates, allowing distributors and equipment integrators to select a configuration according to their application.
The ergonomic handle and digital volume display make the nozzle straightforward to operate and allow users to monitor the measured quantity during dispensing.
The catalog describes correction coefficients for different fuel and temperature conditions. For applications requiring accurate volume reconciliation, the measurement method should account for the applicable fuel type and operating temperature.
An integrated fuel nozzle combines dispensing and volume measurement in one unit. This simplifies the dispensing point, provides a direct volume reading, and can reduce the need for separate metering components in applications where an integrated configuration is suitable.
Model selection should be based on the required flow rate and nominal diameter. The LLY-25 has a rated flow rate of 35 L/min, the LLY-32 is rated at 60 L/min, and the LLY-38 is rated at 80 L/min. Their respective maximum flow rates are 60, 100, and 120 L/min. The selected model should match the actual dispensing conditions rather than maximum flow alone.
Measurement accuracy can be affected by the operating flow rate, fuel characteristics, temperature, and calibration conditions. The catalog also provides correction coefficients for certain diesel and kerosene measurement conditions. Where volume reconciliation is important, buyers should consider the applicable correction method alongside the stated ±1% accuracy.
The integrated nozzle and meter design is intended for fuel dispensing and transfer applications. Suitability for a particular pump, hose, connection, and dispensing system depends on the system’s operating pressure, required flow rate, and connection configuration. The catalog specifies a maximum working pressure of 0.3 MPa.
Distributors should evaluate the required nominal diameter, rated flow rate, maximum flow rate, measurement accuracy, working pressure, and intended fuel. The LLY Series offers three flow configurations, making it possible to select a model for different dispensing requirements while keeping the flow meter integrated into the nozzle.
Automatic nozzles for diesel. These nozzles are fitted with a device that automatically shuts off flow when the tank is full. Complete with swivel connector they conform to the strictest safety requirements. With advantage of high flow rate, easy hung.it is idea nozzle for electric transfer pump on commercial use.
Features:
1.Materical: Aluminum
2.Count Range: 0.1-9999L
3.Inlet / Outlet: 1''
4.Flow rate: 20-60L/min
5.Max Pressure: 0.3Mpa
