OGM25/40/50D Electronic Oval Gear Flow Meter

Product Description

The OGM25/40/50D Digital Oval Gear Flow Meter is designed for measuring compatible fuels and industrial liquids, including diesel, gasoline, kerosene, HVO, and XTL. It combines an oval gear measuring mechanism with a digital display for convenient reading of measured volume and dispensing information. Available in 1″, 1.5″, and 2″ connection sizes, the series supports different flow rates and liquid transfer system requirements.

Key Features

• Digital Display: Provides an electronic readout for convenient volume monitoring.
• Oval Gear Measurement: Designed for measuring compatible liquids with varying viscosities.
• Multiple Model Options: OGM25D, OGM40D, and OGM50D cover different flow requirements.
• Flow Rate Options: 20–200 L/min, 25–250 L/min, and 30–300 L/min, depending on the model.
• Measurement Accuracy: ±0.5%.
• Repeatability: ≤0.03%.
• Multiple Connection Sizes: 1″, 1.5″, and 2″ inlet/outlet options.
• Liquid Dispensing Information: The digital display can show measurement and dispensing information, including unit price and amount as illustrated in the catalog.
• Water-Resistant Design: The catalog describes a sealed structure intended to help protect the meter in wet industrial environments.
• Wide Viscosity Range: Maximum listed viscosity of 1000 cP.

Applications

• Diesel and gasoline dispensing
• HVO and XTL fuel transfer
• Kerosene and compatible petroleum products
• Heavy oil measurement
• Industrial liquid transfer systems
• Fuel distribution and dispensing equipment

Technical Specifications

Product Advantages

Clear Digital Readout

The electronic display makes measurement information easy to read during liquid dispensing and transfer operations. The catalog illustrates volume, unit price, and amount display functions.

Model Options for Different Flow Requirements

The OGM25D, OGM40D, and OGM50D are available with different connection sizes and flow ranges, helping buyers match the meter to their system requirements.

Consistent Measurement Performance

The series lists ±0.5% accuracy and ≤0.03% repeatability. These specifications support selection for applications requiring consistent volume measurement.

Sealed Housing Design

The catalog describes a sealed, water-resistant structure for protection against splashing and wet industrial conditions. Confirm the applicable ingress protection rating if a specific IP rating is required.

FAQ

1. What is the difference between the OGM25D, OGM40D, and OGM50D?

The models differ mainly in connection size, flow range, and maximum pressure. OGM25D has a 1″ connection and a 20–200 L/min range; OGM40D has a 1.5″ connection and a 25–250 L/min range; OGM50D has a 2″ connection and a 30–300 L/min range.

2. What information can the digital display show?

The catalog illustrates measured volume, unit price, and amount. Confirm the required display functions and configuration when ordering.

3. Which liquids are suitable for the OGM25/40/50D series?

The catalog lists biodiesel, diesel, HVO, XTL, gasoline, kerosene, and heavy oil applications. Actual suitability depends on fluid compatibility, viscosity, temperature, and operating pressure.

4. Is the digital flow meter waterproof?

The catalog describes a sealed design intended to protect against splashing and wet industrial environments. However, it does not provide a specific IP rating in the supplied information, so a required protection rating should be confirmed before purchase.

5. How do I select the correct digital oval gear flow meter?

Compare the required flow rate, connection size, maximum working pressure, liquid viscosity, and display requirements. OGM25D, OGM40D, and OGM50D have different operating ranges, so the model should match the system’s expected conditions.

Operating Note

Confirm the required model, connection size, maximum operating pressure, liquid compatibility, and display functions before ordering. If the installation requires a specific waterproof or ingress protection rating, request the corresponding specification from the manufacturer.

FAQ

1. Q. Are you manufacturer or trading company ?

    1. We are manufacturer since 2007.

2. Q. When can I get the quotation ? 

    1. We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority. 

3. Q. What is your terms of delivery? 

    1. We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost effective for you.

4. Q. How long is the warranty?

    1. According to international standards, products in standard operation is 1 year(except wearable parts &seals).