Voltage : 12V/24V
Flow rate : 40L/Min
Power:150W
Max pressure:3bar
The AOCHENG DCTP40A Diesel Fuel Transfer Pump is a compact DC-powered pump designed for transferring diesel and other compatible fuels. With 12V/24V power options, a 150W motor, and a maximum flow rate of 40 L/min, it provides a portable solution for refueling agricultural machinery, construction equipment, and other vehicles. Its integrated handle, mounting base, and 2-meter power cable with battery clips support convenient handling and connection to a suitable DC power source.
Compatible Fluids: Diesel, HVO, XTL, and kerosene, subject to manufacturer confirmation and material compatibility.
| Parameter | Specification |
|---|---|
| Model | DCTP40A |
| Pump Type | Electric Fuel Transfer Pump |
| Voltage | 12V/24V DC |
| Power | 150W |
| Maximum Flow Rate | 40 L/min |
| Maximum Working Pressure | 3 bar |
| Inlet/Outlet | 3/4″ |
| Recommended Single Operating Time | 30 minutes |
| Power Cable | 2 m, with battery clips |
| Carton Quantity | 6 pcs |
| Carton Size | 57 × 41 × 28 cm |
| Carton Weight | 19.6 kg |
The compact housing and integrated handle make the DCTP40A suitable for mobile fuel transfer tasks where portability and straightforward handling are important.
The 12V/24V configurations support different vehicle and equipment power requirements. Confirm the required voltage version before ordering.
The mounting base supports installation on a suitable surface, while the included power cable and battery clips simplify connection to a compatible DC power source.
The DCTP40A is designed for transferring diesel and other approved compatible fuels in mobile and stationary applications. Typical uses include refueling agricultural machinery, construction equipment, and vehicles, as well as transferring fuel from storage containers. Its suitability depends on the fluid, power source, and operating conditions.
The DCTP40A has a specified maximum flow rate of 40 L/min. Actual flow depends on factors such as suction conditions, hose dimensions, liquid properties, and discharge resistance. Buyers should evaluate the complete transfer system when determining whether the pump meets their required delivery rate.
Choose the version that matches the available DC power supply and the equipment’s electrical requirements. A 12V model is appropriate for compatible 12V systems, while a 24V model is intended for compatible 24V systems. The selected voltage must match the pump’s nameplate; the two versions should not be treated as interchangeable.
The product catalog lists diesel, HVO, XTL, and kerosene as compatible fluids. Before using alternative fuels, verify compatibility with the pump’s seals and internal materials. Do not use the pump for gasoline or other unlisted liquids unless the manufacturer explicitly confirms suitability.
Check the required voltage, fluid compatibility, connection size, hose arrangement, and installation location. The specified single operating time is 30 minutes, so follow the manufacturer’s operating instructions rather than assuming continuous-duty capability. For mobile installations, ensure the pump and power connections are secured appropriately.
DCTP40 Plastic handle Diesel Fuel Transfer Pump can turn ordinary pump used as a mobile refueling pump connected to the vehicle’s battery, because it has 2m long cable and clips.
It is convenient to carry for its small size and light weight. Powerful, dependable and economical, they are available with 12 and 24-volt direct current motorsIdeal for mounting into plant equipment, construction etc.
Specification
| Model: | DCTP40 plastic handel |
| Type: | Self Priming DC Vane diesel Pump |
| Fluid Viscosity: | 2-20cst (Diesel, Kerosene ) |
| Diameter: | 3/4”BSP |
| Max Flow: | 40L/min |
| Head: | 5-7m |
| Suction Capacity: | Up to 2m |
| Power: | 150W |
| Working Speed: | 2800rpm |
| Power Supply: | DC12V or DC24V |
| Noise Level: | < 70 dB(A) |
| Self Priming: | Yes |
| Bypass Valve | Yes |
