Voltage : 12V/24V
Power : 150W
Flow rate : 40L/Min
Nozzle : Automatic
Hose: 2m suction hose and 4m delivery hose
The DCFD40A is a portable diesel fuel transfer pump kit designed for transferring diesel, HVO, XTL, and kerosene. Powered by a 12V or 24V DC supply, it features a rated power of 150W and a maximum flow rate of 40 L/min. The kit includes a fuel pump, an automatic nozzle, a 2 m suction hose, and a 4 m delivery hose, providing a practical solution for mobile refueling and on-site fuel transfer.
| Parameter | Specification |
|---|---|
| Model | DCFD40A |
| Product Type | Diesel Fuel Transfer Pump Kit |
| Voltage | 12V/24V DC |
| Rated Power | 150W |
| Maximum Flow Rate | 40 L/min |
| Maximum Working Pressure | 3 bar |
| Inlet/Outlet Connection | 3/4 inch |
| Nozzle Type | Automatic |
| Suction Hose Length | 2 m |
| Delivery Hose Length | 4 m |
| Single Continuous Operating Time | Up to 30 minutes |
| Applicable Fluids | Diesel, HVO, XTL, kerosene |
| Component | Description |
|---|---|
| Fuel Transfer Pump | DCFD40A pump unit, 150W |
| Fuel Nozzle | Automatic shut-off nozzle |
| Suction Hose | 2 m |
| Delivery Hose | 4 m |
| Hose Connections | 3/4-inch compatible connections |
| Power Supply | 12V/24V DC, according to selected model |
The DCFD40A is specified for diesel, HVO, XTL, and kerosene. Before use, check that the selected fuel is compatible with the pump, seals, hoses, and nozzle. Do not use the pump with unapproved liquids.
The 12V and 24V versions are designed for different DC power systems. Select the model that matches the available power source, and ensure that the power supply and electrical connections meet the pump’s requirements.
An automatic shut-off nozzle is designed to stop fuel flow when the receiving tank reaches the nozzle’s shut-off level. Keep the nozzle correctly positioned during dispensing and follow the operating instructions to reduce the risk of spills or overflow.
The suction hose draws fuel from the source tank or drum into the pump, while the delivery hose carries fuel to the receiving tank or equipment. Check all connections for leaks and ensure the hoses are suitable for the fuel being transferred.
The product information specifies a single continuous operating period of up to 30 minutes. The pump should be operated according to the manufacturer’s instructions, with appropriate cooling breaks between cycles to help prevent overheating.
This diesel fuel transfer pump kit is easy to move and install thanks to the handle integrated within the body of the pump and the compact design. However, despite the small dimensions, this portable kit is sturdy and reliable over time thanks to its sturdy construction features.
It is equipped with a 4 meter hose, flow meter and the manual nozzle(or automatic nozzle.
Thanks to its characteristics it can be used safely in all those cases in which the dispensing or transfer of ANY BIODIESEL in safe conditions for construction, marine or agricultural machinery is required.
• Cast iron pump body finished with anti-corrosion paint.
• Vane pump with sintered steel rotor and acetal resin vanes.
• By-pass valve incorporated in the pump body.
• Direct current brush motor with permanent magnet stator.
• Motor protection grade IP55.
• Used in intermittent service with 30-minute work cycles.
