Voltage: 110v/220V
Flow Rate: 65L/Min
Power: 550W
Inlet/Outlet: 1 Inch
The ACTP65 Diesel Fuel Transfer Pump is designed for transferring diesel and other compatible fuels in industrial, commercial, and equipment refueling applications. Featuring a 550W electric motor, an internal bypass valve, and a vane pump mechanism, it provides a maximum flow rate of 65 L/min for routine fuel transfer operations. Available with 110V or 220V power options, the ACTP65 is suitable for compatible fuel supply systems requiring efficient liquid transfer and controlled internal flow circulation.
| Parameter | Specification |
|---|---|
| Model | ACTP65 |
| Product Type | Electric Diesel Fuel Transfer Pump |
| Power Supply | 110V / 220V |
| Rated Power | 550W |
| Maximum Flow Rate | 65 L/min |
| Maximum Working Pressure | 3 bar |
| Pump Mechanism | Vane Pump |
| Bypass Valve | Integrated |
| Compatible Fluids | Diesel, HVO, XTL, Kerosene |
| Package Quantity | 2 pcs/carton |
| Carton Dimensions | 53 × 30 × 25 cm |
| Carton Weight | 16 kg |
Efficient Fuel Transfer
With a maximum rated flow of 65 L/min, the ACTP65 supports routine fuel transfer and refueling tasks. Actual flow depends on the fuel properties, suction conditions, pipework, and discharge resistance.
Flexible Electrical Configuration
The 110V and 220V options allow buyers to select a version that matches the available electrical supply. Confirm the required voltage and frequency before installation.
Integrated Bypass Design
The internal bypass valve supports flow circulation within the pump when dispensing conditions require it. Follow the manufacturer’s operating instructions and avoid operating the pump outside its specified pressure limits.
Motor Protection
The thermal protection system helps reduce the risk of motor overheating under specified operating conditions. Correct installation, ventilation, and electrical protection remain important for reliable operation.
Versatile Fuel Handling
The product is listed for diesel, HVO, XTL, and kerosene. Confirm compatibility with the exact fuel formulation and all wetted components before use.
The ACTP65 has a catalog-listed maximum flow rate of 65 L/min. The actual delivery rate can vary with fuel viscosity, suction lift, hose length, pipe diameter, filter resistance, and discharge pressure. When selecting a pump for a specific installation, evaluate the expected operating flow rather than relying on the maximum rating alone.
The catalog identifies diesel, HVO, XTL, and kerosene as compatible fluids. However, compatibility depends on the exact fuel formulation and the materials used in the pump, seals, hoses, and fittings. Confirm the complete system’s compatibility with the manufacturer before transferring alternative fuels or using the pump in a new application.
Choose the electrical version that matches the available supply at the installation site. Before connecting the pump, verify the rated voltage, supply frequency, wiring requirements, and appropriate circuit protection. Do not connect a 110V version to a 220V supply unless the manufacturer explicitly confirms that the specific unit supports both voltages.
The bypass valve allows internal fuel circulation under appropriate operating conditions, helping manage pressure when the outlet flow is restricted. It is not a substitute for following the manufacturer’s operating instructions or observing the pump’s maximum working pressure. Confirm the permitted bypass operation and any restrictions on continuous operation with a closed dispensing nozzle.
Check the electrical supply, required flow rate, maximum working pressure, inlet and outlet connections, suction conditions, and compatibility with the intended fuel. The catalog specifies a maximum working pressure of 3 bar. The pump should be installed with suitable hoses, fittings, electrical protection, and fuel-handling safety measures appropriate to the application.
In the range of diesel transfer pumps, this electric pump consists of a by-pass valve for precise adjustment of the quantity of flow transferred, while dispensing, with a flow rate of up to 65 l/min. The vane pump with sintered steel rotor and acetal resin vanes, and the induction motor with aluminum casing make this diesel electric pump suitable for continuous cycle applications, requiring a reliable and quality product. The thermal protection protects it in case of motor overloads.
Features:
· Self-priming diesel fuel transfer pump
· Only suitable with diesel or biodiesel, kerosene
· Pumping speed 80ltr per min. 220v
· Direct drive, self-priming, vane pumping units, 1″ BSP ports
· Switch & 2m long mains cable. Internal bypass
· Weatherproof to IP55 for outdoor use
· Continuously rated motor
Specification
| Product | ACTP65 |
| Model number | ACTP65 |
| Flow(LPM) | 65 |
| Speed(RPM) | 2900 |
| HP | 1 |
| Watts | 400w |
| Diameter | 1″ inch |
| Material | cast iron |
| Volt | 220V |
| Bypass valve | yes |
| Self priming | yes |
| Seal type | lip |
